REGISTER
 

Tom's training log...

12345678910 ... 496497498 ... 865866867868869870871872873874875

SimeonIcon...01-09-2012 @ 09:41 
Avatar
tight in the hole
Member 2057, 3121 posts
SQ 205, BP 140, DL 260
605.0 kgs @ 95kgs UnEq
When are you going to have another one of your legendary PB cycles tom?
Tom_MartinIcon...01-09-2012 @ 09:46 
Avatar
No one believed him anyway.
Member 958, 11411 posts
SQ 410, BP 215, DL 425
1050.0 kgs @ 100kgs UnEq
Simeon said:When are you going to have another one of your legendary PB cycles tom?


Whenever the fire comes back! Same goes for competing... I like ticking over and working on new things. I also like smashing the powerlifts until i run myself in the ground, but once i get there i usually like to spend a decent amountt of time not killing myself before i do it again.
Tom_MartinIcon...01-09-2012 @ 09:47 
Avatar
No one believed him anyway.
Member 958, 11411 posts
SQ 410, BP 215, DL 425
1050.0 kgs @ 100kgs UnEq
Short answer, when i get that bas***d 200kg front squat!!!
DANGERUSSIcon...01-09-2012 @ 16:20 
Avatar
Member 1687, 113 posts
SQ 240, BP 170, DL 265
675.0 kgs @ 100kgs Eq
Tom_Martin said:Been doing some thinking regarding the rounded upper back position i have to adopt to rack the bar for a front squat, and why not everybody else has to do the same.

From looking at others who are good at this, they seem to rack the bar behind their clavicles. This is a secure shelf regardless of whether the shoulders are forwards or back.

I however rack the bar in front of my clavicles, and have to create an un natural shelf by pushing my shoulders forwards, therefore rounding my upper back.

Why don't I rack it behind my clavicles?

Well I did some investigating (looking in the mirror). To say there is no f**king room behind them is an understatement. The outer most surface of my clavicle sits completely flush with my neck. If you presume my clavicles is an estimated 12mm thick, and I am using a 29mm bar, then to get the bar behind my clavicles i would have to imbed it a full 4cm into my god damn neck. With the best will in the world, that's just not going to happen is it?

So what you are saying in laymans terms is....you are a MEATHEAD! ;-)
drewIcon...01-09-2012 @ 16:25 
Avatar
I thought Joplin choked on a sandwich?
Member 616, 8404 posts
SQ 180, BP 130, DL 220
530.0 kgs @ 78.8kgs UnEq
How thick is your neck out of interest?
Tom_MartinIcon...01-09-2012 @ 16:31 
Avatar
No one believed him anyway.
Member 958, 11411 posts
SQ 410, BP 215, DL 425
1050.0 kgs @ 100kgs UnEq
drew said:How thick is your neck out of interest?


off the top of my head, 18.5 maybe 19"
Tom_MartinIcon...01-09-2012 @ 16:34 
Avatar
No one believed him anyway.
Member 958, 11411 posts
SQ 410, BP 215, DL 425
1050.0 kgs @ 100kgs UnEq
DANGERUSS said:
So what you are saying in laymans terms is....you are a MEATHEAD! ;-)


that is basically the problem Wink

I've been told i need to just force the bar behind it but 4cm is a long way, it's not about pain tolerance, it's about molecules occupying a limited amount of space. There's only so far you can compress and squeeze them all together before the bar and my neck will both turn into liquids...
Tom_MartinIcon...01-09-2012 @ 16:36 
Avatar
No one believed him anyway.
Member 958, 11411 posts
SQ 410, BP 215, DL 425
1050.0 kgs @ 100kgs UnEq
obviously i know that's wrong and that a liquid form is less tightly packed than a solid form but it sounded more effective than turning into slightly more densely packed solids.
drewIcon...01-09-2012 @ 16:42 
Avatar
I thought Joplin choked on a sandwich?
Member 616, 8404 posts
SQ 180, BP 130, DL 220
530.0 kgs @ 78.8kgs UnEq
Tom_Martin said:
off the top of my head, 18.5 maybe 19"


Forget front squatting mines 16" and I struggle to get shirts that fit right you must be f**ked

Miron the big neck brah
Tom_MartinIcon...02-09-2012 @ 00:21 
Avatar
No one believed him anyway.
Member 958, 11411 posts
SQ 410, BP 215, DL 425
1050.0 kgs @ 100kgs UnEq
drew said:
Forget front squatting mines 16" and I struggle to get shirts that fit right you must be f**ked
Miron the big neck brah


I'm a f**king liar it's barely even 18". Piece of s**t neck.
EvisIcon...02-09-2012 @ 03:23 
Member 2202, 346 posts
SQ 282.5, BP 220, DL 320.5
823.0 kgs @ 120kgs UnEq
Post Edited: 02.09.2012 @ 03:24 AM by Evis
So its normal to actually rack the bar behind the clavicle? I think for me its almost on top of them or maybe slightly in front and bar racked more behind the shoulders.

I've done "that bas***d 200kg frontsquat" without any sign of back bending or fainting. Felt quite easy actually. I squat less and certainly deadlift a f**king s**t ton less than you Tom, with a similar build. What I do have however, is 25kg more bodyweight. So moral of the story apparently is, get fat to frontsquat more. Roll-Eyes
Tom_MartinIcon...02-09-2012 @ 10:41 
Avatar
No one believed him anyway.
Member 958, 11411 posts
SQ 410, BP 215, DL 425
1050.0 kgs @ 100kgs UnEq
My guess is that you have stronger upper back muscles and quads, thus keeping your back straighter, and you being stronger wih your hips and knees further forwards than I am. Congrats, you have a more balanced anterior/posterior strength ratio than most powerlifters!
GingyIcon...02-09-2012 @ 10:44 
concept 2 guru
Member 1235, 4675 posts
SQ 190, BP 137.5, DL 220
547.5 kgs @ 85kgs UnEq
Lol! Noticed a post on Pendlay Forum Happy Another set of people to love you Tongue

If you're serious about doing the Oly lifts mate, I'd just do them. All the mobility in the world probably isn't as good as just getting stuck in and doing a few snatches Happy
Tom_MartinIcon...02-09-2012 @ 10:52 
Avatar
No one believed him anyway.
Member 958, 11411 posts
SQ 410, BP 215, DL 425
1050.0 kgs @ 100kgs UnEq
Gingy said:Lol! Noticed a post on Pendlay Forum Happy Another set of people to love you Tongue

If you're serious about doing the Oly lifts mate, I'd just do them. All the mobility in the world probably isn't as good as just getting stuck in and doing a few snatches Happy


lol in time, I'm still recovering from last time I 'just got stuck in' and separated my lat and tricep from each other. By just trying to force the positions.
GingyIcon...02-09-2012 @ 10:53 
concept 2 guru
Member 1235, 4675 posts
SQ 190, BP 137.5, DL 220
547.5 kgs @ 85kgs UnEq
Tom_Martin said:
lol in time, I'm still recovering from last time I 'just got stuck in' and separated my lat and tricep from each other. By just trying to force the positions.


Was this forcing the positions? Or was it forcing the weight up?

12345678910 ... 496497498 ... 865866867868869870871872873874875

© Sugden Barbell 2026 Privacy - Terms & Conditions