REGISTER AN ACCOUNT
Who's Online - 0 members and 133 guests

Inzer lever belt bolts

Users viewing topic: & 1 Guest

12

1369philIconInzer lever belt bolts30-01-2013 @ 18:31 
Avatar
doesnt work hard enough in the gym
Member 1492, 2138 posts
SQ 170, BP 145, DL 195
510.0 kgs @ 112kgs UnEq
Waited ages for my 10mm Inzer forever lever belt - it came with only one bolt

Any ideas on the spec of the bolt (size , thread type etc) ?

My Dad (ex builder) seems to think that yank screws are different from UK ones (American thread ?)
bertieIcon...30-01-2013 @ 18:43 
I work as a boner
Member 3115, 490 posts
SQ 240, BP 140, DL 300
680.0 kgs @ 132kgs Eq
All lever belts I've seen have the same bolts in. I've some spare if you want them.
brynevansIcon...30-01-2013 @ 18:45 
Avatar
Scotbasher - forever
Member 59, 2115 posts
just go into your local hardware shop and match it up, chances are it will be a UNF thread if its american(maybe 1/4 or 5/16th) if not probablyM6/ M8 metric. Its easy just to thread the matching nut onto your bolt, take the buckle and bolt with you.
1369philIcon...05-02-2013 @ 11:06 
Avatar
doesnt work hard enough in the gym
Member 1492, 2138 posts
SQ 170, BP 145, DL 195
510.0 kgs @ 112kgs UnEq
Unsuccessful at the hardware shop - the metric bolts have much tighter thread
mikex101Icon...05-02-2013 @ 11:19 
Avatar
never too old
Member 637, 760 posts
Have you emailed inzer and asked the question?

I dont know where you live, but theres bound to be a fasteners trade place knocking around., Theres a couple where i live that stock pretty much every bolt known to man.
WesIcon...05-02-2013 @ 11:21 
31.6 and Obese !! Get in....
Member 869, 1355 posts
SQ 320, BP 200, DL 310
830.0 kgs @ 97.5kgs Eq
I would have thought it would be a metric thread ??
mikex101Icon...05-02-2013 @ 13:20 
Avatar
never too old
Member 637, 760 posts
Wes said:I would have thought it would be a metric thread ??


Youll normally find the US will use imperial as standard.
1369philIcon...05-02-2013 @ 14:35 
Avatar
doesnt work hard enough in the gym
Member 1492, 2138 posts
SQ 170, BP 145, DL 195
510.0 kgs @ 112kgs UnEq
mikex101 said:Have you emailed inzer and asked the question?

I dont know where you live, but theres bound to be a fasteners trade place knocking around., Theres a couple where i live that stock pretty much every bolt known to man.


There's no contact e-mail address on the Inzer site - I've emailed House of Pain (where I purchased it) and have zero response after a fortnight.

Pretty poor show to be honest - especially as the belt bills itself as "forever"

I have used a shorter bolt I have on an old (rusty) cheap lever belt - which has done the job thus far

There appears to be a market for Imnperial bolts in the classic car field - I am investigating
mikex101Icon...05-02-2013 @ 15:32 
Avatar
never too old
Member 637, 760 posts
1369phil said:
There's no contact e-mail address on the Inzer site - I've emailed House of Pain (where I purchased it) and have zero response after a fortnight.
Pretty poor show to be honest - especially as the belt bills itself as "forever"
I have used a shorter bolt I have on an old (rusty) cheap lever belt - which has done the job thus far
There appears to be a market for Imnperial bolts in the classic car field - I am investigating


Poor show. Emails are easy to ignore, send one or two a day. Itll soon get on their nerves and youll get a response.

Serisouly, do a search for a fasterners company in your area. Theres a huge market for nuts and bolts, not just in niche markets like classic cars.

If your in the north east i could point you int he right direction.
StrengthshopIcon...05-02-2013 @ 17:15 
Avatar
Member 3745, 143 posts
We've plenty spare bolts for them, just send us a message using the contact form on the site and we'll send you one (would assume the size is the same, but not 100% sure).
AdamCIcon...05-02-2013 @ 18:00 
Avatar
Member 1519, 1476 posts
SQ 320, BP 260, DL 320
900.0 kgs @ 117kgs Eq
Post Edited: 05.02.2013 @ 18:03 PM by AdamC
support@inzernet.com

they've always been fairly quick to reply to my emails

house of pains customer service used to be superb till Rick Brewer got screwed out of the company
1369philIcon...05-02-2013 @ 21:40 
Avatar
doesnt work hard enough in the gym
Member 1492, 2138 posts
SQ 170, BP 145, DL 195
510.0 kgs @ 112kgs UnEq
Bertie has kindly offered to send me one - I will ask Buzz to send one with my next strength shop order (seems wrong to ask for one)
1369philIcon...06-02-2013 @ 12:29 
Avatar
doesnt work hard enough in the gym
Member 1492, 2138 posts
SQ 170, BP 145, DL 195
510.0 kgs @ 112kgs UnEq
Massive thanks to Bertie - bolts arrived today, from the kindness of his heart
bertieIcon...06-02-2013 @ 15:21 
I work as a boner
Member 3115, 490 posts
SQ 240, BP 140, DL 300
680.0 kgs @ 132kgs Eq
1369phil said:Massive thanks to Bertie - bolts arrived today, from the kindness of his heart


You're welcome mate. Did they fit okay?
1369philIcon...06-02-2013 @ 17:36 
Avatar
doesnt work hard enough in the gym
Member 1492, 2138 posts
SQ 170, BP 145, DL 195
510.0 kgs @ 112kgs UnEq
bertie said:
You're welcome mate. Did they fit okay?


Perfection - both long and short bolts work - I have used the long belt (as it's the same as the inzer provided one)

12

© Sugden Barbell 2024 - Mobile Version - Privacy - Terms & Conditions